Are you looking for a reliable page that tells you everything about the Wansview camera setup? Well, no problem! We are here to help you with your camera setup. In this post, we will explain to you how you can set up your Wansview camera and what you can do if you do not succeed in setting it up.
These cameras come with a variety of functions, including motion detection, night vision, and two-way audio, and are simple to set up and use. We’ll walk you through setting up a Wansview camera in this blog article so you may use it to protect your home or place of business. Wansview cameras are a dependable and economical alternative for monitoring your property, whether you are a house or business owner. Consequently, let’s begin the Wansview camera setup procedure.
So let’s start with the Wansview camera setup without any further ado.
Steps for the Wansview camera setup
In this section, you will learn how to set up your Wansview home security camera. We have discussed the whole process in a step-by-step manner to allow for your easy understanding. Kindly follow the setup guide carefully:
Step 1: Camera unboxing
Unboxing and inspecting the contents of your Wansview camera come first in the Wansview camera setup process. The box should contain the camera, a power supply, an Ethernet cable, and an instruction booklet.
Step 2: Turning the Camera On
You need to connect the camera needs to a power supply after that. Wait for the camera to turn on after plugging in the power adapter. An audible buzzer sound and flashing of the camera’s LED light are also expected.
Step 3: Connect the Wansview camera to WiFi
After the camera has been turned on, you must link it to your Wi-Fi network. To do this, you will need to download the Wansview app from the App Store or Google Play Store. Open the app after installation, then register a new account and go about the Wansview camera setup. You must create a password and enter your email address.
Thereafter, add your camera by following the app’s instructions. You will need to connect your phone to the same Wi-Fi network as your camera. After that, select the “Add Camera” option in the app and scan the QR code on the bottom of the camera. The app will automatically detect the camera and add it to your Wansview account.
Step 4: Wansview camera setup
You can customize the camera’s settings once it has been added to your account. You can easily configure Motion detection, night vision, and two-way audio. Additionally, you may program your phone to send alerts when your camera detects motion.
Step 5: Camera mounting
The camera must then be mounted in the desired area. The mounting bracket and screws for Wansview cameras are included, making it simple to put the camera on a wall or ceiling. Aim the camera in the desired direction, and if necessary, change the angle.
Why I can’t set up my Wansview camera?
There could be many reasons why you are struggling to set up your Wansview home security camera. Here are some of the most common reasons for Wansview camera setup failing:
- Frequent disconnecting in WiFi
- Router compatibility issues
- Incorrect configuration
- Wansview camera firmware is outdated
I can’t set up my Wansview camera. What to do?
Are you struggling to go about the Wansview camera setup? Don’t worry as we will help you through this section. In this part of the guide, you will find the troubleshooting tricks to get rid of the setup issues on your home security camera.
- Verify your internet connection
Verify your Wi-Fi network’s functionality and the camera’s network connectivity. Look for the LED light on the camera to verify this. The camera is not linked to the network if it is flashing.
- Verify the camera’s positioning
Place the camera in a location with a strong Wi-Fi signal. The camera might be unable to connect to the network if the signal is weak.
- Reset the Wansview camera
Try resetting the camera to its factory default settings if it is not responding. To accomplish this, hold down the camera’s reset button for around 10 seconds or until the LED light flashes.
- Reconfigure the camera
Try removing and reinstalling the camera via the Wansview app if none of the aforementioned methods work. To accomplish this, open the app’s settings and choose “Remove Device” for the problematic camera. After that, adhere to the directions to add the camera once again and finalize the Wansview camera setup.
- Update Wansview camera firmware
Once you reconfigure your device, make sure you perform an update on it. You can login to the Wansview camera using the mobile app. After that, go to Settings and find the Firmware Update page to go about the update.
This post was all about the Wansview camera setup and configuration. In this post, we discussed how to set up your Wansview home security camera using the Wansview app. Furthermore, we walked you through the potential reasons why you may struggle while setting up your home security camera.
We suggest that you always refer to the troubleshooting steps mentioned in this post whenever you come across any problems with your device. We hope that you were able to set up your device without any hassle.
If you come across any issues with your Wansview security camera or have any doubts, kindly feel free to reach out to our support team for further assistance. Our support team brings years of extensive experience in helping our users with their day-to-day camera issues.